| 110.14 - Tightening Torque Inspection and Responsibility |
| 110.26 - Working Space and Clearances |
| 210.11 - Number of Outlets on Circuits in Dwellings |
| 210.52(A) & 210.12(A) - Sunroom Requirements |
| 210.52(A) - Wall Space v. Wall Countertop Space |
| 210.52(C)(3) - Dwelling Kitchen Peninsular Required Receptacle(s) |
| 210.52(E) - Outdoor Receptacle Requirements for Dwellings |
| 210.8(A)(4) - GFCI Protection in a Crawl Space |
| 210.8(B) - General Rules for GFCI Protection of Receptacles in Non-Dwelling Applications |
| 230.7 - Meter Enclosures with Generator Feed-Through Feeders |
| 230.70(A)(1) - Length of Service-Entrance Conductors |
| 250.24(A) - Grounding Electrode Conductor Bonding to Neutral |
| 250.52(A) - Engineered Electrodes Permitted for Grounding |
| 250.53 - Grounding Electrodes For Single Family Dwellings |
| 250.64(B) - Exterior Grounding Electrode Conductors Exposed to Physical Damage |
| 90.2(B)(5) - Electrical Utility Conductors and Equipment |
| Article 100 - Structures Defined |
| NCFRC Meeting Minutes 2017 April |
| Temporary Family Health Care Structures in NC Memo |
